DMP Electronics eBOX-3350MX-AP Manual do Utilizador Página 47

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 112
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 46
386SX Single Chip PC Jan Yin Chan Electronics Co.,LTD.
DM&P M6117D : System on a chip
Page 46
Jan Yin Chan Electronics Co,. LTD. M6117D 386SX Single Chip PC
8F-1,No.22,Wuchyuan 2RD.,Hsin Chuang city Taipei Hsien, Taiwan, R.O.C. Tel: 886-(02) 2298-0770 Fax: (02) 2299-1883
INDEX 34H
(Power-on setup, Read only)
Bit No., Name Description
7~6 reserved
5 26,
DACK6J
reserved, must be pulled high
4 199, AEN ISA clock test mode, when TESTJ
= 0
3 22,
DACK3J
reserved, must be pulled high
bit is reversed when readout
2 20,
DACK2J
Internal RTC
0 : disable
1 : enable
1 Reserved
0 16,
DACK0J
reserved, must be pulled low.
Read 0=C mode, 1=D mode.
INDEX 35H (Power-on setup, Read only)
Bit No., Name Description
7 119,
ROMKBCSJ
reserved, must be pulled low.
6 24, DACK5J reserved, must be pulled low.
5 28, DACK7J Internal Keyboard Controller
selection
0 : disable
1 : enable
4~2
reserved, must be 0.
1 18, DACK1J Memory parity check
0 : disable
1 : enable
0
reserved
INDEX 36H default 00H
Bit Description
7 16 bit ISA cycle insert 1 wait
0 : disable
1 : enable
6 PS/2 mouse IRQ12 timing
0 : direct connect IRQ12 to 8259
1 : send IRQ12 to 8259 after latch
5~4 Slow refresh control bits : Refresh
period
0 0 : 15 us
0 1 : 120 us
1 0 : 15 us
1 1 : 60 us
3 reserved, must be 0
2~0 Chip version (Read only)
010 : M6117D
INDEX 37H
default 00H
Bit Description
7 Latch Watchdog timer value and
counter read mode.
0: When read from
Index3BH,3AH,39H, the read value is
the setting counter value
1: When bit 7 set from 0 to 1, the
counter present value will be latched
to buffer. When read from Index
3BH,3AH,39H, the read value is the
buffer value. The counter will keep on
counting.
6 Watchdog timer
0: disable
1: enable
5 EXTSW2 de-bouncing circuit
0: enable internal de-bouncing circuit
1: bypass internal de-bouncing circuit
4 EXTSW1 de-bouncing circuit
0: enable internal de-bouncing circuit
1: bypass internal de-bouncing circuit
3 Reserved, must be 0
2 Internal mouse selection
0: disable
1: enable
1 Reserved, must be low
0 EDO DRAM mode
0: disable
1: enable
Vista de página 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 111 112

Comentários a estes Manuais

Sem comentários