DMP Electronics XR500 Manual do Utilizador descarregar pdf (Página 29)

Digital Monitoring Products XR500 Series Canadian Programming Guide

deviCe SeTuP

6.15.6

ACTIVATE ONBOARD

SPEAKER? NO YES

Activate Onboard Speaker

SelectYEStoenabletheonboardpiezospeakerforlocalannunciation.SelectNOto

turn the piezo off for all operations. This does not affect remote annunciator open

collector(RA)operation.ThedefaultisYES.

PresstheCOMMANDkeytodisplaytheCARDOPTIONSoption.TheBackArrow

returnstoACTIVATEZONE3REX.

6.15.7

CARD OPTIONS:

DMP

Card Options

Press any top row Select key to display options. Press the select key under DMP or

CUSTOMtoselectthatoption.SelectDMPtoindicatethereadersendsa26-bitDMP

datastring.PresstheCOMMANDkeytodisplayREQUIRESITECODE.

Note: When set to DMP, the 734 converts 17 bits of the 26-bit data string into a

5-digit number.

SelectCUSTOMifusinganon-DMPcardorusercodelengthof6to10digits.

Default is DMP.

6.15.8

WIEGAND CODE

LENGTH: 26

CustomCardDenitions

Whenusingacustomproduct,enterthetotalnumberofbitstobereceivedin

Wiegandcodeincludingparitybits.

PressanytoprowSelectkeytoenteranumberbetween0-255toequalthenumber

ofbits.Defaultis26bits.

Typically,anaccesscardcontainsdatabitsforasitecode,ausercode,andstart/

stop/paritybits.Thestartingpositionlocationandcodelengthmustbedetermined

andprogrammedintothe734Module.

01110101101101010001100111

First Bit

Received

Position = 0

Site Code

Position = 1

Length = 8

User Code

Position = 9

Length = 16

Last Bit

Received

Position = 25

In this example the Wiegand Code Length = 26 bits.

6.15.8.1 Site Code Position

Enter the site code start position in the data string. Press any top row Select

 keytoenteranumberbetween0-255.Defaultis1.

6.15.8.2 Site Code Length

Enter the number of characters the site code contains. Press any top row

 Selectkeytoenteranumberbetween1-16.Defaultis8.

6.15.8.3

USER CODE

POSITION: 9

User Code Position

DenetheUserCodestartbitposition.PressanytoprowSelectkeyto

 enteranumberbetween0-255.Defaultis9.

6.15.8.4

USER CODE

LENGTH: 16

User Code Length

 DenethenumberofUserCodebits.PressanytoprowSelectkeytoenter

 acustomnumber.Customnumberscanonlybeanumberbetween16-32.

 ThedefaultistheDMPvalueof16whichispre-programmed.

CARD OPTIONS:

DMP CUSTOM

SITE CODE

POSITION: 1

SITE CODE

LENGTH: 8

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 83 84

Comentários a estes Manuais

Sem comentários

DMP Electronics XR500 Manual do Utilizador Página 29

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso DMP Electronics XR500