DMP Electronics SCS2 Manual do Utilizador descarregar pdf (Página 7)

JTAG-Booster for AMD ÉlanSC520

JTAGEL5d.doc 7

1.3. First Example

In the following simple example it is assumed that the JTAG-Booster is connected

to LPT1 of your PC and target power is on.

Typing

JTAGEL5 /P MYAPP.BIN /VERIFY

at the DOS prompt results in the following output:

JTAGEL5 --- JTAG utility for AMD ÉlanSC520

Version 3.0 of mm/dd/yyyy

(1) Configuration loaded from file JTAGEL5.INI

(2) Target: FS FORTH-SYSTEME, EVA520

(3) Using LPT at I/O-address 0378h

(4) JTAG Adapter detected

(5) More than 9 devices detected in JTAG chain or TDI pin stuck at low level

Device 0: IDCODE=10EFF003 AMD ÉlanSC520, Revision 1

Device 1: IDCODE=10EFF003 AMD ÉlanSC520, Revision 1

Device 2: IDCODE=10EFF003 AMD ÉlanSC520, Revision 1

Device 3: IDCODE=10EFF003 AMD ÉlanSC520, Revision 1

Device 4: IDCODE=10EFF003 AMD ÉlanSC520, Revision 1

Device 5: IDCODE=10EFF003 AMD ÉlanSC520, Revision 1

Device 6: IDCODE=10EFF003 AMD ÉlanSC520, Revision 1

Device 7: IDCODE=10EFF003 AMD ÉlanSC520, Revision 1

Device 8: IDCODE=10EFF003 AMD ÉlanSC520, Revision 1

(6) Sum of instruction register bits : 4

(7) CPU position : 0

(8) Instruction register offset : 0

(9) AMD 29F040 detected

(10) Erasing Flash-EPROM Block #:6 7

Programming File MYAPP.BIN

131072 Bytes programmed

Programming ok

1 2 3 4 5 6 7 8 9 10 11 12 ... 50 51

Sem comentários

DMP Electronics SCS2 Manual do Utilizador Página 7